Our World

NASCLA Master Electrical Contractor Exam Preparation

Written by

cmolnar

in

Prepare for the NASCLA Accredited Electrical Examination with a structured course covering exam preparation, reference-book navigation, electrical theory, calculations, code application, and practical exam-solving techniques.

Course Information

Course Instructor

cmolnar cmolnar Author
 

Free

FREE
Enroll Now

Part I – Exam Preparation and Reference Navigation

Lesson 1 – Introduction to the NASCLA Electrical Contractor Exam
Lesson 1 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 2 – Exam Format, Scoring, and Time Management
Lesson 2 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 3 – Understanding the NASCLA Exam Domains
Lesson 3 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 4 – The NASCLA Approved Reference Library
Lesson 4 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 5 – Preparing and Tabbing Your NASCLA Reference Books
Lesson 5 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 6 – Open-Book Navigation Techniques
Lesson 6 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 7 – Reading and Interpreting NASCLA Exam Questions
Lesson 7 of 8 within section Part I – Exam Preparation and Reference Navigation.
0
Lesson 8 – Exam-Day Question Strategy
Lesson 8 of 8 within section Part I – Exam Preparation and Reference Navigation.
0

Part II – Electrical Theory and Calculations

Lesson 9 — Electrical Quantities and Ohm’s Law
Lesson 1 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 10 – Electrical Power and Energy Calculations
Lesson 2 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 11 – Series, Parallel, and Combination Circuits
Lesson 3 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 12 – AC Fundamentals and Power Factor
Lesson 4 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 13 – AC Fundamentals and Power Factor
Lesson 5 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 14 – Transformers and Transformer Calculations
Lesson 6 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 15 – Motors and Motor Principles
Lesson 7 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 16 – Voltage Drop Calculations
Lesson 8 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 17 – Load Calculations
Lesson 9 of 10 within section Part II – Electrical Theory and Calculations.
0
Lesson 18 – Electrical Theory and Calculation Review
Lesson 10 of 10 within section Part II – Electrical Theory and Calculations.
0

Part III – General Code Requirements

Lesson 19 – How the NEC Is Organized
Lesson 1 of 8 within section Part III – General Code Requirements.
0
Lesson 20 – NEC Article 90 — Introduction and Application
Lesson 2 of 8 within section Part III – General Code Requirements.
0
Lesson 21 – NEC Article 100 — Definitions
Lesson 3 of 8 within section Part III – General Code Requirements.
0
Lesson 22 – Electrical Installation Requirements — Article 110
Lesson 4 of 8 within section Part III – General Code Requirements.
0
Lesson 23 – Working Space, Dedicated Space, and Equipment Access
Lesson 5 of 8 within section Part III – General Code Requirements.
0
Lesson 24 – Interrupting Ratings, SCCR, and Available Fault Current
Lesson 6 of 8 within section Part III – General Code Requirements.
0
Lesson 25 – Identification, Marking, Listings, and Labeling
Lesson 7 of 8 within section Part III – General Code Requirements.
0
Lesson 26 – NEC Chapters, Tables, Annexes, and Index Navigation
Lesson 8 of 8 within section Part III – General Code Requirements.
0

Part IV – Wiring and Protection

Lesson 27 – Branch Circuit Fundamentals
Lesson 1 of 14 within section Part IV – Wiring and Protection.
0
Lesson 28 – Branch-Circuit Ratings and Required Circuits
Lesson 2 of 14 within section Part IV – Wiring and Protection.
0
Lesson 29 – Feeders
Lesson 3 of 14 within section Part IV – Wiring and Protection.
0
Lesson 30 – Services
Lesson 4 of 14 within section Part IV – Wiring and Protection.
0
Lesson 31 – Service Conductors and Service Equipment
Lesson 5 of 14 within section Part IV – Wiring and Protection.
0
Lesson 32 – Overcurrent Protection
Lesson 6 of 14 within section Part IV – Wiring and Protection.
0
Lesson 33 – Ground-Fault Circuit Interrupter Protection
Lesson 7 of 14 within section Part IV – Wiring and Protection.
0
Lesson 34 – Arc-Fault Circuit Interrupter Protection
Lesson 8 of 14 within section Part IV – Wiring and Protection.
0
Lesson 35 – Surge Protection
Lesson 9 of 14 within section Part IV – Wiring and Protection.
0
Lesson 36 – Grounding Electrode Systems
Lesson 10 of 14 within section Part IV – Wiring and Protection.
0
Lesson 37 – Equipment Grounding
Lesson 11 of 14 within section Part IV – Wiring and Protection.
0
Lesson 38 – Bonding Requirements
Lesson 12 of 14 within section Part IV – Wiring and Protection.
0
Lesson 39 – Grounded Conductors and Neutral Conductors
Lesson 13 of 14 within section Part IV – Wiring and Protection.
0
Lesson 40 – Grounding and Bonding Calculations
Lesson 14 of 14 within section Part IV – Wiring and Protection.
0

Part V – Wiring Methods and Materials

Lesson 41 – Conductors and Ampacity
Lesson 1 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 42 – Temperature Correction and Adjustment Factors
Lesson 2 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 43 – Conductor Insulation and Applications
Lesson 3 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 44 – Raceways — General Requirements
Lesson 4 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 45 – EMT, IMC, RMC, and Other Metal Raceways
Lesson 5 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 46 –  PVC and Nonmetallic Raceways
Lesson 6 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 47 – Flexible Raceway Systems
Lesson 7 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 48 – Cable Wiring Methods
Lesson 8 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 49 – Boxes, Conduit Bodies, and Enclosures
Lesson 9 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 50 – Box Fill Calculations
Lesson 10 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 51 – Raceway Fill Calculations
Lesson 11 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 52 – Pull Boxes and Junction Boxes
Lesson 12 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 53 – Underground Wiring and Burial Requirements
Lesson 13 of 14 within section Part V – Wiring Methods and Materials.
0
Lesson 54 – Wet, Damp, Hazardous, and Corrosive Locations
Lesson 14 of 14 within section Part V – Wiring Methods and Materials.
0

Part VI – Equipment for General Use

Lesson 55 – Switches and Switching Devices
Lesson 1 of 3 within section Part VI – Equipment for General Use.
0
Lesson 56 – Receptacles and Attachment Plugs
Lesson 2 of 3 within section Part VI – Equipment for General Use. You must enroll in this course to access course content.
0
Lesson 57 – Panelboards and Switchboards
Lesson 3 of 3 within section Part VI – Equipment for General Use. You must enroll in this course to access course content.
0

Comments

Leave a Reply

More posts