Message:19318 In: TECH.WW
From: G8MNYDate: Sat, 21 Mar 26 09:48:00 Z
Newsgroups: TECH.WW
Subject: Rig DC Power & RF Hazards
Message-ID: <55054_GB7CIP>
Path: N2NOV|K7EK|VE3CGR|LU9DCE|GB7YEW|GB7CIP
R:260321/0952z @:N2NOV.#RICH.NY.USA.NOAM $:55054_GB7CIP
R:260321/0952z @:K7EK.#NOKY.KY.USA.NOAM $:55054_GB7CIP
R:260321/0951Z 72088@VE3CGR.#SCON.ON.CAN.NOAM LinBPQ6.0.25
R:260321/0951Z 9708@LU9DCE.TOR.BA.ARG.SOAM LinBPQ6.0.25
R:260321/0951Z 15822@GB7YEW.#79.GBR.EURO LinBPQ6.0.24
R:260321/0948Z @:GB7CIP.#32.GBR.EURO #:55054 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
By G8MNY (New Feb 12)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
With connection to add ons to to your rig there is a hazard that can burn out
or dammage ground wiring in your... PC, Noise Eliminating LS, Preamps
Powered Auto ATUs, and rotators etc.
The cause is high DC or RF currents being allowed to flow over signal leads
cause by faulty earths and earth loops.
ÚÄÄÄÄÄÄÄÄ¿ + 20A
³ ÃÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ In this example the
³ Power ³ ³ ÚÄÁÄ¿ the rig is earthed only
³ ³ ÚÄÄÁÄÄ¿ LS lead ³ ³ via the LS.
³ Supply ³ ³NoiseÃÄÄÄÄÄÄÄÄÄ´Rig³ Damage can be to..
³ ³ ³ LS ÃÄÄÄÄÄÄÄÄÄ´ ³ Rig LS socket wiring,
³ ³ ÀÄÄÂÄÄÙ ÀÄÂÄÙ Rig PCB,
³ ÃÄÄÄÄÄÁÄÄÄÄÄ//ÄÄÄÄÄÄÄÙ LS lead,
ÀÄÄÄÄÄÄÄÄÙ - Failed/poor Noise LS PCB,
Rig Earth Noise LS Power lead.
Using no PSU earth connection and only earthing via the rig connection is a
possable cure for low current accessories.
ÚÄÄÄÄÄÄÄÄ¿ + 20A
³ ÃÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Power ³ ³ ÚÄÁÄ¿
³ ³ ÚÄÄÁÄÄ¿ LS lead ³ ³
³ Supply ³ ³NoiseÃÄÄÄÄÄÄÄÄÄ´Rig³
³ ³ ³ LS ÃÄÄÄÄÄÄÄÄÄ´ ³
³ ³ ÀÄÄÂÄÄÙ ÀÄÂÄÙ
³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
ÀÄÄÄÄÄÄÄÄÙ -
In the next example there is both DC & RF problems.
ÚÄÄÄÄÄÄÄÄ¿ + 20A
³ ÃÄÄÄÄÄÄÄ¿ \³/
³ Power ³ ÚÄÁÄ¿ ³
³ ³ ³ ÃÄÙ ÚÄÄÄÄÄÄ¿
³ Supply ³ ³Rig³ AF Lead ³Laptop³ VGA Lead ÚÄÄÄÄÄÄ¿
³ ³ ³ ÃÄÄÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÄÄÄ´SCREEN³
³ ³ - ÀÄÂÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÂÄÄÄÙ
³ Ú------ÃÄÄÄÄ//ÄÙ ÚÄÁÄ¿No DC ³
ÀÄÂÄÄÄÄÄÄÙ Failed/poor ³PSU³earth MAINS
MAINS Rig Earth ÀÄÂÄÙ Earth
Earth MAINS
DC can dammage...
PSU earth wiring and Mains lead,
Rig AF socket/PCB,
AF lead, Laptop mother board,
VGA lead, Screen, and Screen power lead.
If there is no DC fault but RF voltage on the rig, RF currents can damage..
Rig AF socket/PCB,
AF lead, Laptop mother board,
Latop PSU's mains RF filter,
VGA lead, Screen.
See my Tech Buls on "BHI Noise Eliminating DSP LS", "A Simple V.O.X. Circuit",
"PSK31 interface isolation".
Y Don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
Return To Bulletin List