Message 30102 in TECH.WW
From: G8MNY
Date: Wed, 16 Sep 26 09:19:00 Z
Newsgroups: TECH.WW
Subject: 23cm 10el Yagis for ATV
Message-ID: <5253_GB7CIP>
Path: N2MH4|VE3KPG|VE3CGR|CX2SA|ED1ZAC|GB7CIP
R:260916/0925Z 37270@N2MH4.#SENC.NC.USA.NOAM LinBPQ6.0.24
R:260916/0925Z 1118@VE3KPG.#ECON.ON.CAN.NOAM BPQ6.0.25
R:260916/0924Z 94968@VE3CGR.#SCON.ON.CAN.NOAM LinBPQ6.0.25
R:260916/0922Z @:CX2SA.SAL.URY.SOAM #:4471 [Salto] FBB7.00e $:5253_GB7CIP
R:260916/0920Z @:ED1ZAC.EAC.ESP.EU #:27716 [EANET1G.06] $:5253_GB7CIP
R:260916/0919Z @:GB7CIP.#32.GBR.EURO #:5253 [Caterham Surrey GBR] $:5253_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
Schematic for 1.2 GHz ATV ant
From G3ZJO (new Feb 06 edited G8MNY)
I have great success with the following dimensions which are from an old DOS
yagi design program.
Make the BOOM from double sided PCB 10 - 15mm wide.
Make the elements from brass brazing rod 3mm dia or copper wire.
Make the driven element a folded dipole or use a gamma match.
1249MHz 1316MHz
Reflector Length = 12.20cm 11.57cm
Reflector Spacing = 4.80cm 4.55cm
Driven Element = 11.40cm 10.81cm
Director1 Spacing = 2.88cm 2.73cm
Director1 Length = 10.83cm 10.27cm
Dir2 Spacing = 3.34cm 3.17cm
Dir2 Length = 10.72cm 10.17cm
Dir3 Spacing = 3.88cm 3.68cm
Dir3 Length = 10.62cm 10.07cm
Dir4 Spacing = 4.50cm 4.26cm
Dir4 Length = 10.51cm 9.97cm
Dir5 Spacing = 5.22cm 4.95cm
Dir5 Length = 10.40cm 9.87cm
Dir6 Spacing = 6.05 5.74cm
Dir6 Length = 10.30cm 9.77cm
Dir7 Spacing = 7.02cm 6.66cm
Dir7 Length = 10.20cm 9.67cm
Dir8 Spacing = 8.14cm 7.72cm
Dir8 Length = 10.10cm 9.57cm
Boom Length = 45.82cm 43.45cm
Gain = 11.67dBd 11.67dBd
........................................................................
For Gamma matching drill holes & solder all elememts at center point.
ref de dir1 2 3 4 5 6 7 8
------------------------------------------------------------
o o o o o o o o o o
----I--------------------------------------------------------
===feeder=0
I
BNC or N socket mounted in a notch in the boom.
Detail of Gamma match
22mm
Driven ele. -----------------------------I-----------o---------------
C 5pF var.
o-----------o
.........................................................................
For Folded dipole notch top of boom & solder center of element, feed at
socket.
ref de dir1 2 3 4 5 6 7 8
------o------------------------------------------------------
o o o o o o o o o
-----I--------------------------------------------------------
====feeder==0o
I
BNC or N socket mounted in notch.
.......................................................................
73 - Eddie, G3ZJO @ GB7BEN
Why don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
← Return to Bulletin List