Message 23418 in TECH.WW
From: G8MNY
Date: Tue, 02 Jun 26 06:35:00 Z
Newsgroups: TECH.WW
Subject: USB Connections
Message-ID: <61319_GB7CIP>
Path: N2NOV|VE2PKT|PY2BIL|HB9ON|VK7AX|GB7CIP
R:260602/0643z @:N2NOV.#RICH.NY.USA.NOAM $:61319_GB7CIP
R:260602/0643Z 9916@VE2PKT.#TRV.QC.CAN.NOAM LinBPQ6.0.25
R:260602/0642Z 44489@PY2BIL.SP.BRA.SOAM LinBPQ6.0.25
R:260602/0642Z 12942@HB9ON.TI.CHE.EU LinBPQ6.0.24
R:260602/0641Z 12411@VK7AX.#ULV.TAS.AUS.AUNZ LinBPQ6.0.24
R:260602/0635Z @:GB7CIP.#32.GBR.EURO #:61319 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
By G8MNY (Corrected Oct 07)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
(from info suppied by DG1VV, F5CMK & GM7HUD)
______ ______
Pin Name / UU \ / \ _________ _________
Periferal end Periferal end Type A Male Type A Female
Type B Male Type B Female Plug Front Socket Front
Plug Socket
If still confused which way around the the connections are measure the earth or
+5V to prove which way you are looking at your plug/socket PCB pins etc.
Hub PSU requirements: 5V @ 500mA per port. So a 4 port hub needs a 5V 2A PSU.
Y Don't U sent an interesting bul?
73 de John G8MNY @ GB7CIP
← Return to Bulletin List